Signs in Construction
Traffic Control Signs and Devices
At points of hazard, construction areas must be posted with legible traffic control signs and protected by traffic control devices.
The design and use of all traffic control devices, including signs, signals, markings, barricades, and other devices, for protection of construction workers must conform to Part 6 of the Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) (incorporated by reference, see 1926.6).
Accident Prevention Tags
Tags are temporary signs, usually attached to a piece of equipment or part of a structure, to warn of existing or immediate hazards. They are used only until the identified hazard is eliminated or the hazardous operation is completed.
Accident prevention tags must be used as a temporary means of warning employees of an existing hazard, such as defective tools, equipment, etc. They must not be used in place of, or as a substitute for, accident prevention signs.
For accident prevention tags, employers must follow specifications that are similar to those in Figures 1 to 4 of ANSI Z35.2-1968 or Figures 1 to 8 of ANSI Z535.5-2011, incorporated by reference in 1926.6.
Knowledge Check Choose the best answer for the question.
3-3. Accident prevention tags _____.
You forgot to answer the question!