Maintenance Area Safety
To prevent injury or illness when doing maintenance on a forklift:
Make sure there is adequate ventilation to prevent accumulation of exhaust or gas fumes.
- Do not do repairs in an area with a potentially flammable or combustible atmosphere.
- Make sure there is adequate ventilation to prevent accumulation of exhaust or gas fumes.
- Do not use a flammable solvent to clean a forklift. Use a non-combustible (flash point above 100 degrees Fahrenheit) solvent.
- Never get under a forklift supported only by a jack or under any part supported only by hydraulic pressure. Install jack stands or a secure block support. Do not rely on a single point of support.
- To prevent the forklift from accidentally being started, remove and keep control of the key or disconnect the battery while making repairs. If the electrical system will be serviced, you must disconnect the battery before starting repairs.
- Battery changing stations for forklifts should reflect both proper safety precautions and good housekeeping techniques. A clean, uncluttered work area reduces the possibility of accidents to workers and equipment.
- Install "No smoking" signs and eye wash stations to prevent serious injuries.
Knowledge Check Choose the best answer for the question.
4-2. Workers must never get under a forklift supported only by _____.
You forgot to answer the question!