Workplace Inspections
Inspections are the best understood and most frequently used tool to assess the workplace for hazards. Much has been written about them, and many inspection checklists are available in various OSHA publications.
The term "inspection" means a general walk-around examination of every part of the worksite to locate conditions that do not comply with safety standards. This includes routine industrial hygiene monitoring and sampling.
Inspection Frequency
The regular site inspection should be done at specified intervals. The employer should inspect as often as the type of operation or character of equipment requires. Think about the most hazardous operation or location in your company. How often are safety inspections conducted there?
OSHA expects all places of employment to be inspected by a qualified person or persons as often as the type of operation or the character of the equipment requires. Defective equipment or unsafe conditions found by these inspections should be replaced or repaired or remedied promptly.
The frequency of the safety inspection is really a judgment call for the employer, but at a minimum, medium and large fixed worksites should be inspected completely at least every quarter, with some part of the inspection occurring each month. The frequency of a safety inspection depends on the nature of the work and workplace. More frequent change and higher probability for serious injury or illness requires more frequent inspection. For construction sites, daily inspections are a must because of the rapidly changing nature of the site and its hazards.
At small fixed worksites, the entire site should be inspected at one time. And even for the smallest worksite, inspections should be done at least quarterly. If the small worksite uses hazardous materials or involves hazardous procedures or conditions that change frequently, inspections should be done more often.
Sound Safety Inspection Policy: All employees should inspect their area of responsibility at the beginning and end of each shift, and bridge the inspections with continual observation. If a hazardous condition is observed, eliminate it if you safely can, or report it immediately.
Knowledge Check Choose the best answer for the question.
3-5. What criteria should be used to determine the frequency of a safety inspection?
You forgot to answer the question!